I have a disk image (ghost) of the disk need to be restored, and believe the ghost.exe should run from bootable USB with DOS, but I can't seem to create it. My laptop does not have a a cd-rom or floppy drive.I managed to find a Ghost utility that I could load from a bootable USB drive. Unfortunately, when I plug in my NTFS external drive (USB), it is not detected.
How about give it a try? First download and install it on your computer and then follow the steps below to create bootable USB as well as create image backup. Please remember to backup your USB drive in advance, because it will erase all the data.
Norton Ghost 2003 is last representative of the original like of Ghost. althouth still a DOS program it has Windows shell that can launch it directly from Windows, reboot PC to DOS using a virutal partition with DOS execute backup and return to Windows.
The speed of Norton Ghost 2003 in disk to disk operation is really amazing: approx 10 min to backup a partition with ~4G of data (many small html files) with the image size slightly over 2G and just 3-4 min to restore this partition. For typical windows XP C drive (say 10G of data) Ghost 2003 takes approximately 25 min and produces image approximately 7G in size. For comparison to create a RAR archive for the 4G partition takes over an hour on the same computer. I still feel more comfortable with Ghost 2003 more then with Ghost 2004 (Ghost 9). IMHO Ghost 2003 has value of its own due to its DOS roots. For example if your computer is infected with spyware it should be restored using DOS boot.
Norton Ghost 2003 (Ghost 8) and earlier is unable to create image in Windows mode and needs to reboots to DOS. That might create several problems for which Norton Ghost 9 and 10 can be a better solutions:
Note: Older versions of Norton Ghost (2003 and earlier) cost almost nothing and are still quite capable for users with regular desktops (less so for laptops). With the current double layer DVD technology there is a possibility to write an image of C drive on one double layer DVD. It makes a perfect backup solution: you can create a compressed image of the disk partition and then burn to DVD each week. In most cases "clean" image of the boot drive (usually around 10-12G for a typical Windows XP installation) can be compressed by Ghost into the image that is 7-9G. Absence of a set of "recovery" Ghost images can be considered as one of the most dangerous mistakes any PC user can make and can cost many hours of troubleshooting even if you know windows reasonably well.
Norton Ghost 2003 is advanced and fantastic software which provides you backup and restore facilities. It offers these facilities while offering you support for encryption and scheduled tasks. it is developed by Symnatec which provided you with Norton Antivirus as well. This software provides you the maximum security over this process. You can also download Acronis Backup and Recovery.
There are several installation modes like standard mode and custom mode. You can install this software by selecting either of these modes. When you are providing a new task you will have to choose the source and destination locations, giving a name to the backup and protecting it with a password. This software comes wrapped in a catchy and modern looking interface which is very user friendly. This software needs you to provide a restore point during the initial backup task. It works step by step and you will have to follow the instructions given by it. In this way if there happens an error or something goes wrong you can easily go back to the previous state where PC worked correctly. This software has many other useful tools as well which help you very much. On the ending note you can say that Norton Ghost 2003 is a reliable and secure solution for backup and restore. You can also download Power Data Recovery.
The Ghost 2003 Retail CD is itself bootable, along with the Ghost v9.0 Restore CD. With v2003, using the -ghostoncd switch copies the executable (ghost.exe) to the root of the CD. The -bootcd switch bypasses it asking for a floppy and just copies it directly from the CD boot image. See this thread for more.
But you won't be using the latest version of Ghost with the bootable CD, since the ghost executable (ghost.exe) is updated via the Symantec Live Update feature (online), and you (almost) always want to use the latest version, which implements bug-fixes and adds features (such as support for Serial ATA drives). Back in the day, you used to have to do it this way ( Partition > To Image">screen shot], you select your burner as the destination for the image [screen shot]. After you select compression [screen shot], Ghost will ask if you want to copy a bootable floppy to the CD-R [screen shot]. Then it will ask if the floppy disk is in the floppy drive, so you need to have your bootable floppy disk handy. Then it will ask if you want to proceed with the backup to CD-R [screen shot].
Norton Ghost 2003, a consumer edition of Ghost, was released on September 6, 2002. Available as an independent product, Norton Ghost 2003 was also included as a component of Norton SystemWorks 2003 Professional. A simpler, non-corporate version of Ghost, Norton Ghost 2003 does not include the console but has a Windows front-end to script Ghost operations and create a bootable Ghost diskette. The machine still needs to reboot to the virtual partition, but the user does not need to interact with DOS. Symantec deprecated LiveUpdate support for Norton Ghost 2003 in early 2006.
The limitations of Ghost 9 compared to Ghost 2003 were not well-communicated by Symantec, and resulted in many dissatisfied customers who purchased Ghost 9 expecting the previous version's features (like making images from the bootable Ghost environment, no installation required, and no product activation). 2b1af7f3a8